NEWS INFORMATION
每個行業里都有它的專業名詞，鈑金加工行業也不例外。常見有以下25個。
(1)壓鉚:指采用沖床或油壓機把壓鉚螺母、壓鉚螺釘或壓鉚螺母柱等緊固件牢固地壓接在工件上的工藝過程。
(2)漲鉚:指先將工件沉孔，再采用沖床或油壓機把漲鉚螺母牢固地壓接在工件上的工藝過程。
(3)拉母:指采用類似鉚接的工藝。用拉母槍把拉鉚螺母(POP)等連接件牢固地連接在工件上的工藝過程。
(4)拉鉚:指以拉鉚槍為工具用拉釘將兩個或兩個以上工件緊密地連接在一起的工藝過程。
(5)鉚接:用鉚釘將兩個或兩個以上工件面對面連接在一起的工藝過程，若是沉頭鉚接，需將工件先進行沉孔。
(6)切角:指在沖床或油壓機上使用模具對工件角進行切除的工藝過程。
(7)折彎:指工件由折彎機成型的工藝過程。
(8)成形:指在普通沖床或其他設備上使用模具使工件變形的工藝過程。
(9)剪料:指材料經過剪板機得到矩形工件的工藝過程。
(10)下料:指工件經過LASER切割或數控沖床沖裁的工藝過程。
(11)落料:指在普通沖床或其他設備上使用模具加工得到產品形狀的工藝過程。
(12)沖孔:指工件由普通沖床和模具加工孔的工藝過程。
(13)沖凸包:指在沖床或油壓機用模具使工件形成凸起形狀的工藝過程。
(14)沖撕裂:也叫"沖橋"，指在沖床或油壓機用模具使工件形成像橋一樣形狀的工藝過程。
(15)抽孔:也叫"翻邊"，指在普通沖床或其他設備上使用模具對工件形成圓孔邊翻起的工藝。過程。
(16)攻牙:指在工件上加工出內螺紋的工藝過程。
(17)校平:指工件加工前、后不平整，使用其他的設備對工件進行平整的過程。
(18)回牙:指對預先攻有牙的工件進行第二次螺牙的修復的過程。
(19)鉆孔:指在鉆床或銑床上使用鉆頭對工件進行打孔的工藝過程。
(20)倒角:指使用模具、銼刀、打磨機等對工件的尖角進行加工的工藝過程。
(21)沖印:指使用模具在工件上沖出文字、符號或其他印跡的工藝過程。
(22)沉孔:指為配合類似沉頭螺釘一類的連接件，而在工件上加工出有錐度的孔的工藝過程。
(23)拍平:指對有一定形狀的工件過渡到平整的工藝過程。
(24)沖網孔:指在普通沖床或或數控沖床上用模具對工件沖出網狀的孔。
(25)擴孔:指用鉆頭或銑刀把工件上小孔加工為大孔的工藝過程。
Industry nouns
Every industry has its professional terminology, sheet metal processing industry is no exception. The following 25 are common.
(1) Pressure riveting: refers to the process of pressing the fasteners such as riveting nuts, riveting screws, or riveting nut columns firmly on the workpiece using a punch or hydraulic press.
(2) High Rivet: refers to the process of sinking the workpiece first, and then using a punch or oil press to press the rising rivet nut firmly on the workpiece.
(3) Puller: means a process similar to riveting. The process by which a pull rivet nut(POP) and other connectors are firmly connected to the workpiece with a pull gun.
(4) Pulling riveting: refers to the process of drawing two or more workpieces together with a rivet as a tool.
(5) Rivet: The process of connecting two or more workpieces face to face with riveting. If the head is riveted, the workpiece must be sunk first.
(6) Angle cutting: refers to the process of using a mold to remove the corner of the workpiece on a punch or hydraulic press.
(7) Bending: refers to the process of forming a workpiece by a bending machine.
(8) Forming: refers to the process of using a mold to deform a workpiece on a common punch or other equipment.
(9) Shear material: refers to the process by which the material is obtained from a rectangular workpiece through a shearing machine.
(10) Discharge: refers to the process of cutting a workpiece through LASER cutting or CNC punch.
(11) Discharge: refers to the process of using molds to obtain the shape of the product on ordinary presses or other equipment.
(12) Punching: refers to the process of machining holes in a workpiece by ordinary punching machines and molds.
(13) Flashing bump: refers to the process of forming a raised shape of a workpiece with a mold used in a punch or press.
(14) Punching: also known as "punching bridge", refers to the process of forming a workpiece in the shape of a bridge with a mold used in a punch or press.
(15) Portion: Also known as "flanging", refers to the process of using a mold to form a round hole edge on a workpiece on a common punch or other equipment. Process.
(16) Incoming teeth: refers to the process of processing internal threads on a workpiece.
(17) Calibration: refers to the process of leveling the workpiece before and after the workpiece is processed and using other equipment.
(18) Back tooth: refers to the process of repairing the second screw tooth on the workpiece that has teeth in advance.
(19) Drilling: refers to the process of using a drill to perforate a workpiece on a drill or milling machine.
(20) Inversion: refers to the process of processing the sharp corners of a workpiece using a mold, a file, a grinder, etc..
(21) Printing: means the process of using a mold to run out of text, symbols, or other prints on a workpiece.
(22) Pitch hole: refers to the process of processing tapered holes on a workpiece in conjunction with connectors such as the pin screw.
(23) Flatness: refers to the process of transition from a workpiece with a certain shape to a flat one.
(24) Punching holes: A hole in a workpiece that is punched out of a mesh with a mold on a common punch or a CNC punch.
(25) Porosity: refers to the process of processing small holes into large holes in a workpiece with a drill or a milling cutter.